Sweep of outbound strings, doc URLs, comments, and clone instructions
that were missed in the original org rename. One both-match case in
setup/lib/channels-remote.sh (URL detection) accepts either name so
existing forks with a `qwibitai` remote continue to resolve cleanly;
everywhere else is a straight rename.
Historical mentions left intact:
- CHANGELOG.md (v2.0.0 entry, frozen history)
- .claude/skills/add-gmail-tool/SKILL.md (pre-v2 qwibitai skill — historical)
- repo-tokens/badge.svg (auto-regenerated by update-tokens.yml)
Remove step 2d (whatsapp-resolve-lids.ts) which pre-created duplicate
messaging_groups rows keyed by @lid alongside the phone-keyed rows.
This caused split sessions — the same contact got separate sessions
depending on which JID format arrived.
With the Baileys v7 upgrade (PR #2259 on channels), the adapter
resolves every LID to a phone JID via extractAddressingContext before
the message reaches the router, making dual rows unnecessary.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
If 1b-db is re-run after the v2 service has already started (e.g.
recovering from an earlier failure), the messaging_group it would
otherwise create may already exist — auto-created by the runtime router
on the first inbound message, with the router's default
unknown_sender_policy ('request_approval'), not the migration's intent
('public'). The previous reuse path skipped creation but never updated
the policy, so re-runs left the bot hanging every message waiting for
an approver that wasn't seeded yet.
When reusing an existing row that has zero wired agent_groups (signal
of a router auto-create), reset the policy to 'public'. Once any wiring
exists, the user has had a chance to tighten via the skill — leave it.
Also adds a CHANGELOG entry covering this and the two sibling fixes
(Discord DM resolution, symlink skip in copyTree).
fs.copyFileSync follows symlinks, so a single broken/dangling link in v1
(e.g. .claude-shared.md → /app/CLAUDE.md, a container-side path that
doesn't resolve on the host) crashed the alphabetical traversal with
ENOENT — preventing later folders, including the actual registered
group, from being copied.
Check entry.isSymbolicLink() and skip with a one-line log. v2 uses
composed CLAUDE.md fragments, so v1's container-path symlinks have no v2
meaning and don't need to be carried forward.
The resolver only enumerated guild channels, so any v1 install whose
registered Discord chat was a DM (a common case for personal-bot
installs) failed 1b-db with "not found in any guild" — leaving the
migration without an agent_group or wiring, and the user with a bot that
received messages but had nowhere to route them.
Add an unresolved-channel classification pass: for any v1 channel id not
found in a guild, GET /channels/<id> and emit discord:@me:<id> when the
type is DM (1) or GROUP_DM (3). Matches the runtime adapter's
guild_id || "@me" encoding. Other types / 404 / 403 keep current
skip-with-warning behavior.
Caller passes the v1 channel id list (already on hand). Test coverage
extends the existing mock-fetch pattern with DM, GROUP_DM, orphan, and
dedupe cases.
v1 stored every WhatsApp DM as `<phone>@s.whatsapp.net`. v2's WA
adapter sometimes resolves the chat to `<lid>@lid` instead — when
WhatsApp delivers via the LID protocol and Baileys hasn't yet learned
a LID→phone mapping for that contact (cold cache after migration).
The router then can't find the phone-keyed messaging_group and
silently drops the message at router.ts:184.
Baileys persists every LID↔phone pair it has ever learned to disk as
`store/auth/lid-mapping-<phone>.json` (forward) and
`lid-mapping-<lid>_reverse.json` (reverse). v1 will already have these
populated for every contact it has talked to. New step 2d-whatsapp-lids
parses the reverse files and writes paired LID-keyed `messaging_groups`
+ `messaging_group_agents` rows so both `<phone>@s.whatsapp.net` and
`<lid>@lid` route to the same agent_group with the same engage rules.
No Baileys boot, no WhatsApp connectivity required — pure filesystem
read of files we've already copied via 2b-channel-auth. Step is
no-op-on-skip if either store/auth or whatsapp DM rows are missing.
Anything that slips through (a contact whose LID v1 never learned)
falls back to the runtime approval flow once the WA adapter sets
isMention=true on DMs — each unknown LID DM auto-creates an
approval-required messaging_group and the owner gets a one-tap
register prompt.
Verified end-to-end on a 12-group v1 install: 3 DM rows aliased,
inbound DM routed via the LID-keyed row.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
v1 didn't track is_group separately; db.ts hardcoded `is_group: 1` for
every messaging_group. v2 uses is_group=0 to collapse DM sub-thread
sessions and to drive routing decisions, so getting it wrong is latent
risk on otherwise-working installs.
New helper inferIsGroup(channelType, platformId) lives in shared.ts so
tasks.ts and any future migration step can reuse it. Inferred per
channel:
- whatsapp: `<id>@g.us` is a group, anything else is a DM
- telegram: negative chat IDs are groups, positive are DMs
- everything else: default to 1 (least surprising for chats v1 chose
to register, where DM auto-create paths weren't used)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- shared.ts: parseJid now recognizes raw Baileys WhatsApp JIDs
(`<id>@s.whatsapp.net`, `@g.us`, etc.); v2PlatformId returns the raw
JID for whatsapp to match what the runtime adapter emits. Without this,
every WhatsApp group in a v1 install was silently skipped.
- discord-resolver.ts: new helper that uses DISCORD_BOT_TOKEN to look up
channelId → guildId via the Discord API, since v1 stored only the
channel id but v2 needs `discord:<guildId>:<channelId>`. Best-effort:
on missing/invalid token or network error, returns empty resolver and
the affected groups are skipped with the reason surfaced per channel.
- db.ts, tasks.ts: route Discord groups through the resolver; other
channels go through v2PlatformId unchanged. Resolver only built when
at least one Discord group exists, so non-Discord installs incur no
network.
- db.ts: when every v1 group is skipped, exit non-zero with a FAIL line
instead of `OK:groups=N,...,skipped=N`, so the wrapper doesn't hide
total failure under a successful-looking summary.
- migrate-v2.sh: run_step now surfaces ERROR: lines from successful
steps (with count + first 3 + raw log path); phase 2c install loop
populates STEP_RESULTS so install failures show in handoff.json
instead of silently passing.
- sessions.ts: copyTree skips dangling symlinks (e.g. v1's
`.claude/debug/latest`) instead of crashing the entire step.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Extracted the helpers we use (JID parsing, trigger mapping, channel
auth registry, generateId, v2PlatformId) into setup/migrate-v2/shared.ts.
Deleted setup/migrate-v1/ entirely — no code references it anymore.
Updated README, CLAUDE.md, docs/v1-to-v2-changes.md, and
docs/migration-dev.md to reference the new paths and migrate-v2.sh
entry point.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New entry point: `bash migrate-v2.sh` from the v2 checkout.
Replaces the old setup-embedded migration flow with a standalone
4-phase script + rewritten Claude skill for the interactive parts.
Phase 0: Bootstrap (Node/pnpm/deps via setup.sh) + find v1
Phase 1: Core state (env, DB, groups, sessions, tasks)
Phase 2: Channels (clack multiselect, auth copy, code install)
Phase 3: Infrastructure (OneCLI, auth, Docker, skills, container build)
Service switchover: stop v1 → start v2 → test → keep or revert
Phase 4: Handoff → exec claude "/migrate-from-v1"
The skill handles: owner seeding, access policy, CLAUDE.local.md
cleanup, container config validation, fork customization porting.
Key fixes found during testing:
- triggerToEngage: requires_trigger=0 must override non-empty pattern
- unknown_sender_policy defaults to 'public' (strict drops all msgs
before owner is seeded)
- Service revert must stop v2 (parse unit name from step log, not
early tsx one-liner that can fail)
- Session continuity: copy JSONL from -workspace-group/ to
-workspace-agent/ and write continuation:claude into outbound.db
- container_config.additionalMounts written directly to container.json
(same shape in v1 and v2)
- EXIT trap writes handoff.json; explicit write_handoff before exec
Includes migrate-v2-reset.sh for dev iteration and docs/migration-dev.md
for testing/debugging reference.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
glifocat